The installation structure of the embedded industrial tablet computer includes a front cover and a rear cover. The touch screen is embedded in the front cover, the display screen is built on the back of the front cover, and the control motherboard is built in the back cover. The front cover is fixedly connected with the rear cover. The cover of the back cover is provided with an outer edge, and the four side edges of the outer edge are respectively provided with connecting bars. The ends of the connecting bars are slidably constructed on the outer edge, and the second end is provided with an installation hole corresponding to the cabinet body Install holes. This is suitable for the construction of a new type of history on the back cover. The connecting strip can be slid back and forth. When installing, the connecting strip can be moved to adjust the position of the installation hole on the second end of the connecting strip relative to the installation hole of the cabinet. , So that the installation hole on the connecting bar is aligned with the installation open area on the cabinet, so as to improve the convenience of the tablet computer installation and the accuracy of the installation position.
An industrial tablet computer that is convenient for guarding, including a touch screen, a front cover, a display screen, a fixed middle board, and a back cover. The center of the front cover is provided with a spreading area, the touch screen is embedded on the side of the spreading area, and the spreading screen is embedded on the second side of the spreading area. There are L-shaped lock screen bars on both sides of the screen. The side history screws of the lock screen are fixed on both sides of the screen. How many studs are provided on the fixed middle plate, the second side of the lock screen bar abuts on the studs, and the historical screws are connected with the studs. The peripheral edge of the front cover plate is provided with screw holes, and the fixing middle plate is provided with a second screw hole corresponding to the screw hole, and the screw hole is connected with the second screw hole by a historical screw. The rear cover is closed on the fixed middle plate. The utility model is suitable for the short structure of the new type, is convenient to assemble and disassemble, and is convenient for guarding.