1. The opening on the left side of the industrial computer and the vent on the back of the power supply are used for ventilation. In order to ensure the normal and reliable operation of the industrial computer and prevent overheating, please do not block or cover these openings.
2. When using an industrial computer, please try to keep a distance of more than one meter from the equipment (inverter, motor, etc.) that will produce strong electromagnetic interference.
3. After the industrial control machine is turned off, please wait for more than 8 seconds when turning it on again.
4. In order to ensure the reliable operation of the industrial computer, we strongly recommend that you do not change the BIOS settings of the motherboard at will.
5. When using the I/0 interface of an industrial computer, it is recommended not to plug or unplug it under power to avoid static electricity damage. When the industrial computer encounters a power failure due to non-human reasons, in order to ensure the normal and reliable operation of the industrial computer, it is recommended to disconnect the industrial computer power immediately and confirm that the power grid is stable before powering on operation; if the power supply is tight and often there are power restrictions, it is recommended Equip the industrial computer with relevant specifications of UPS power supply to ensure the stable operation of the industrial computer.
6. Please do not put the industrial computer on an unstable surface to work.